PU1200 polyurethane hot melt adhesive

Product Features
Moisture reactive type
Suitable for bonding between different materials
Moisture reactive type
After curing, it has excellent heat resistance, water resistance, and chemical resistance
Widely used in the electronics industry

GBT ViaBON PU1200 is a 100% solid content, moisture reactive polyurethane hot melt adhesive that can be used for self-adhesive and mutual bonding of plastics such as PC, ABS, PVC, aluminum, stainless steel, and glazed glass. After being coated and cooled, this adhesive can provide appropriate strength for subsequent production processes; After complete curing, it can exhibit excellent heat resistance, water resistance, and chemical resistance, especially suitable for bonding plastics in the electronics industry.

Anticipated matters
Please read the safety manual before use to understand the relevant preventive measures and safety recommendations. For chemicals that do not require labeling, observe in advance and take corresponding preventive measures.

Product Application
It is mainly suitable for bonding various plastics and metals in the electronics industry. The surface properties of each material vary greatly, and it is recommended to conduct pre experiments before use.

Product Operation
The construction site should have a good ventilation system, and the recommended construction temperature is between 100-130 °C.
GBT ViaBON PU1200 belongs to the moisture responsive polyurethane hot melt adhesive category. Please use professional equipment for reactive hot melt adhesives. If ordinary hot melt adhesive equipment is used, it may cause moisture to seep into the product due to poor airtightness, resulting in curing when in contact with the product, which will damage the adhesive machine or affect its use.
Please assemble the parts immediately after gluing, so that the glue can achieve good wetting effect, which will help with the bonding effect.
In order to achieve complete curing, it is best to place the finished product in a suitable working environment with appropriate temperature and humidity (recommended temperature: 23-25 ° C, relative humidity of about 65%).  
It is recommended to fully cure the assembled electronic products before conducting subsequent related tests.

clean
For uncured products, construction equipment can be cleaned with specialized cleaning agents and must be thoroughly rinsed clean.
The fully cured adhesive is difficult to remove and may require long-term immersion in NMP solvent for removal.

Packing Specification
30ml plastic tube packaging, 300ml support packaging, 25kg drum packaging

Shelf life/storage
Recommended storage temperature: 10-25 ° C, stored in a cool and dry environment
Shelf life: 6 months in original packaging

Precautions
This product is reactive polyurethane. Employees who are allergic to polyurethane products are not recommended to operate.
Due to the need to use the product at high temperatures, please be sure to wear appropriate clothing, gloves, protective goggles, and other personal protective equipment.
Ready to use, do not expose to air for extended periods of time
Maintain first in, first out use of materials.
Cleaning agents should only be used once and should not be mixed into the product
Do not eat in the workplace