SMP5110SF Silane modified polyether adhesive for industrial use
Product Features
- Environmentally friendly products: fast curing, low VOC, non-toxic and odorless,
no pollution or corrosion to the substrate. - Surface coating: After the surface is dry, it can be sprayed with paint for coloring.
- Good operability: single component, easy to operate,
within the temperature range of 4 ℃~40 ℃ - It has good extrusiveness and can be directly applied
by extruding with a glue gun. - Excellent adhesion: to metals, glass, ceramics, wood, PVC, PC, PA
- The material has excellent adhesion.
- Excellent weather resistance, aging resistance, dielectric and
mechanical properties.
Product Application
Adhesive and sealing of windshields and side windows of trains/buses/cars/trucks, etc.
SMP5110SF locomotive specific silane modified polyether adhesive is a single component, high-performance, neutral curing adhesive. This product is environmentally friendly and does not contain toxic or harmful substances. It has good adhesion to most substrates such as metal, glass, ceramics, wood, polyvinyl chloride (PVC), polycarbonate (PC), etc. After curing, the surface can be coated, and it can be widely used for bonding and sealing windshield and side window glass of various trains/buses/cars.
| Item | Parameter | Test Standard |
| color | black | - |
| Curing method | moisture curing | - |
| Working temperature (°C) | -40~+100 | - |
| Dry time (min) | 5~15 | GB/T 13477-2002 |
| Curing rate (mm/24h) | 4~5 | - |
| Density (g/cm ³) | 1.40~1.60 | GB/T 13477-2002 |
| Hardness (Shore A) | 45 | GB/T 531-2009 |
| Tensile strength (MPa) | 2.5~3.5 | GB/T 528-2009 |
| Tensile elongation at break (%) | ≥400 | GB/T 528-2009 |
| Shear strength (MPa) | ≥3 | GB/T7124-2008 |
| Tear strength (N/mm) | 20 | GB/T 529-2008 |
| Storage period (month) | 6 | BS 3712-2 |
Attention to use
Before using this product, operators must carefully read the product safety information materials.
The construction surface must be clean, dry, and free of dirt;
Manual or pneumatic glue gun can be used for direct extrusion construction;
Good ventilation should be maintained during construction and curing processes.
To ensure the best bonding effect, a bonding test should be conducted before mass use, and regular peel bonding tests should be conducted during the construction process to ensure effective use.
Safety Instructions
This product is non-toxic after complete curing, but should be avoided from contact with eyes before curing. If it comes into contact with eyes, please rinse with plenty of water and seek medical attention; Uncured products should be avoided from contact with children.
Packaging
Net content 300ml packaging.
Storage and expiration date
It should be stored in a cool and dry place below 27 ° C. The storage period is 6 months from the date of production.
